The wide 1m roll of the EkoBuild Ribbon for open floors, living rooms, bedrooms and kitchens. Whole stocked lengths suit open runs. Use the floor-specific build-up and check that usable output meets the room’s heat loss before relying on it as primary heat. Manufacturer warranty is subject to AHT’s certificate.




Demonstration samples show material details, not a complete installation specification. Check your floor build-up before ordering.
The 1m-wide mat suits open runs where a complete stocked length fits. It can be part of a primary-heating design when the usable output meets the room’s heat loss at the permitted floor temperature.
AHT Ribbon is a 1.8mm electric heating mat with a nominal output of 150W/m² of fitted mat. Choose whole stocked mats that fit the available floor, and check the complete floor construction, controls and room heat loss.
Ribbon can provide primary heating when the usable output from the fitted mats meets the room’s calculated heat loss at the permitted floor temperature. Around 70–80% useful coverage is a planning aim, not a pass/fail test. Confirm the complete heating design before removing existing heating.
Choose a flooring product approved for underfloor heating and follow its temperature, thermal-resistance and installation limits. The Ribbon is 1.8mm thick, but insulation, underlay, rigid preparation and the floor finish add to the complete build-up.
Ribbon can provide primary heating when the usable output from the fitted mats meets the room’s calculated heat loss at the permitted floor temperature. Around 70–80% useful coverage is a planning aim, not a pass/fail test. Confirm the complete heating design before removing existing heating.
Use the free Room Designer to map your room and get the whole-mat layout and stock estimate, or talk to Russell for a hand.